Filter
Top Products
- 9 -
installation. Note: When the Software Installation warning pops up, click Yes. And
when the Hardware Installation warning pops up, click Yes again.
Add Windows XP Driver on Original Booting Device
1. After the
SATA RAID PCI Host Adapter
and attached drives are configured, boot up
Windows.
2. At the Found New Hardware Wizard, check Install from a list or specific
location (advanced), then click Next.
3. Insert the Driver diskette. Check Include this location in the search, uncheck the
other box, type in A:\, and click Next.
4. When a warning message pops up, click Continue Anyway, then click Finish.
Verification of the Proper Installation for Windows 2000/XP
1. Double click My Computer/Control Panel/System.
2. Click Hardware then click Device Manager.
3. Double click SCSI and RAID Controllers, then double click Silicon Image Sil-3112
SATA Raid Controller to display driver properties.
4. A message
This device is working properly
is displayed in the dialog box, the
driver has been correctly installed.