Filter
Top Products
ADSL Gateway
with Modem / Router / 4-Port Switch / Wireless-Ready
7
Instant Broadband
™
Series
6
C. Connect one end of an Ethernet cable to your PC’s Ethernet adapter.
Connect the other end of the cable to one of the LAN ports on the back of
the Gateway. Repeat this process for every PC that you want to connect to
the Gateway.
Note: If your PC’s Ethernet adapter is not set up, refer to the Ethernet
adapter’s user guide for more information.
If you are connecting more than four PCs to the Gateway, you will also need
to connect a hub or switch to the Gateway.
C1
C
2
Note: If you have a Linksys Wireless PC Card (WPC11), be sure to
fully insert it into the PC Card slot on the back of the Gateway before
turning on the power. You must have this card inserted in order to use
the Gateway’s wireless features.
Step 1: Connect the ADSL
Gateway
In Step 1, you will connect the Gateway to your ADSL line and to the comput-
ers in your home or business.
First, make sure that all the devices that you’ll be working with are powered
down, including your PCs and the Gateway.
A. Connect one end of the provided phone cable to the ADSL (RJ-11 phone)
port that is on the back of the Gateway.
B. Connect the other end of the phone cable to the wall jack with ADSL service.
A
B