Filter
Top Products
ADSL Gateway
with Modem / Router / 4-Port Switch / Wireless-Ready
D. Click the Gateway tab to ensure that the Installed Gateway field is blank.
Click the OK button.
E. Click the OK button again. Windows may ask you for the original
Windows installation disk or additional files. Supply them by pointing to
the correct file location, e.g., C:\windows\options\cabs, D:\win98,
D:\win9x, etc. (if “D” is the letter of your CD-ROM drive).
F. Windows may ask you to restart your PC. Click the Yes button. If Windows
does not ask you to restart, restart your computer anyway.
Proceed to Step 3: Configure the Gateway.
A. Click the Start button. Click Settings and then Control Panel. Double-
click the Network and Dial-up Connections icon.
B. Select the Local Area Connection icon for the applicable Ethernet adapter
(usually it is the first Local Area Connection listed). Double-click the Local
Area Connection.
C. The Local Area Connection
Status screen will appear.
Click the Properties button.
11
Instant Broadband
™
Series
10
Windows 2000 Instructions
C
A. Click the Start button. Click Settings and then Control Panel. Double-
click the Network icon.
B. On the Configuration tab, select the
TCP/IP line for the applicable
Ethernet adapter. Do not choose a
TCP/IP entry whose name mentions
DUN, PPPoE, VPN, or AOL. If the
word TCP/IP appears by itself, select
that line. (If there is no TCP/IP line
listed, refer to your Ethernet adapter’s
user guide to install TCP/IP now.)
Click the Properties button.
C. Click the IP Address tab. Select
Obtain an IP address automatically.
Windows 95, 98, or Millennium Instructions
B
C