In Step 1, you will connect the Router to your ADSL modem and to your home or
business computers.
First, make sure that all devices you’ll be working with are powered down, including
your PCs, modem, and the Router.
A. If you haven’t already done so, connect your ADSL modem to the phone jack.
(Follow the instructions from your ADSL modem’s installation guide.)
B. Using an Ethernet cable, connect the
LAN or Ethernet port of the ADSL
modem to the Router’s WAN port.
94
Step 1: Connect the Router
B
95
C. Connect an Ethernet cable to
your PC’s Ethernet adapter.
Connect the other end of the
cable to one of the Router’s
LAN ports. Repeat this process
for every PC you wish to con-
nect to the Router.
Note: If your PC’s Ethernet adapter is not set up, please refer to the Ethernet
adapter’s documentation for more information.
For ease of installation, start with LAN
Port 1 on the Router, then Port 2, Port 3,
and finally Port 4.
D. Connect the power adapter to the Router’s Power port. Then, connect the
power adapter to an electrical outlet. Turn on the ADSL modem. Then turn on
the first PC you wish to use when configuring the Router.
Proceed to Step 2: Configure the PCs on the next page.
C1
C2
Instant Wireless™ Series
Wireless Access Point Router with 4-Port Switch