Filter
Top Products
6. A window will open saying that Windows is now ready to install the Linksys
EG1032/EG1064 Instant Gigabit Network Adapter driver. Click Next.
7. Windows will begin copying the Instant Gigabit Network Adapter’s driver
files to your PC.
At this point, the installation may require files from your Windows 98 CD-
ROM. If prompted, insert your Windows 98 CD-ROM into your CD-ROM
drive and enter d:\win98 in the box that appears (where “d” is the letter of
your CD-ROM drive). If you were not supplied with a Windows 98 CD-
ROM, your Windows files may have been placed on your hard drive by
your computer manufacturer. While the location of these files may vary ,
many manufacturers use c:\windows\options\cabs as the path. Try enter-
ing this path into the box. If no files are found, check your computer’s doc-
umentation or contact your computer manufacturer for more information.
4. Select Search for the best driver for your device (Recommended). Click
Next.
5. Select Specify a location and enter a:\win98 in the drop down box. Click
Next to continue.
NNoottee::
Windows 98 may ask you for a
ccoommppuutteerr oorr wwoorrkkggrroouupp
nnaammee
. If so, see the next section,
NNeettwwoorrkk CCoommppoonneenntt
CCoonnffiigguurraattiioonn
. Once you have established your computer and
workgroup names, return to where you left off and continue with
the installation.
Instant Gigabit Series
EtherFast
®
10/100/1000 8+1 Workgroup GigaSwitch Starter Kit
2019