Linksys EG0801SK Network Card User Manual


 
Windows NT 4.0 Installation &
Setup
The following instructions will set up the Instant Gigabit Network Adapter in a
computer running NT 4.0 server/workstation. You should have your original
Windows NT CD-ROM available during the installation, as you might be asked
to supply it. Always contact your network administrator or consult your NT
documentation if you have questions.
To install the network driver for an NT 4.0 Server or Workstation
1. Log into Windows NT as an administrator (or as a user with administra-
tive rights) .
2. Click on Start, Settings, Control Panel, and then double-click on the
Network icon.
3. If you have not previously installed Windows NT networking on your com-
puter, a message will appear that reads: Windows NT Networking is not
installed. Do you want to install it now?
• If you see this message, click Ye s to install NT networking along with the
Instant Gigabit Network Adapter's network driver, and continue to the next
section.
• If you don't see this message, NT networking is already installed and you
should turn to the Installing the Instant Gigabit Network Adapter
Driver if Networking is Already Installed section.
Overview
8. The following screen will appear next, indicating that the drivers have been
installed successfully. Click the Finish button.
9. When asked if you want to restart your PC, remove all disks and click Yes.
If Windows does not ask you to restart your PC, click the Start button,
choose Shut Down, choose Restart, then click Ye s .
The Windows Millennium driver installation is complete. Refer to the sec-
tion on Configuring the Instant Gigabit Network Adapter for Windows 95, 98,
and Millennium for more information about the setup of the Adapter.
NNoottee::
From this point on, you must provide Windows with a
User name and Password every time you are prompted to
do so. Remember to click
OOKK
to properly log into Windows.
If you click
CCaanncceell
or hit the
EEssccaappee ((EESSCC))
key, you will not
log into the network.
Instant Gigabit Series
EtherFast
®
10/100/1000 8+1 Workgroup GigaSwitch Starter Kit
2625