EtherFast Cable/DSL Routers
34
Instant Broadband Series
33
3. A username and password prompt will appear. Leave the User Name
field empty and type admin, which is the default password, into the
Password box. Click OK.
4. The Cable/DSL Router’s Setup page will appear.
5. Configure the following values:
Host Name & Domain Name These fields allow you to give a Host and
Domain name for the Router. Some ISPs require these names as identifi-
cation. You may have to check with your ISP to see if your broadband
Internet service has been configured with Host and Domain names. In
most cases, leaving these two fields blank will still work.
Configuring Your Network with the
Cable/DSL Router
Configuring the Cable/DSL Router
Now that your Cable/DSL Router is connected to your network, you can
begin configuring your Router.
1. Make sure that each of your PCs has the TCP/IP protocol configured.
Otherwise, see page 64 now to do so, before configuring your Router.
2. Open your web browser and type http://192.168.1.1 in the
browser’s Address field. This number is the default IP address of your
Router. Press Enter.
IIMMPPOORRTTAANNTT!!
If you have previously enabled any
IInntteerrnneett--sshhaarriinngg
pprrooxxyy sseerrvveerr ssooffttwwaarree
on any of your PCs, you must disable it now.
Some examples of proxy server software are Internet LanBridge,
Wingate, and Sygate. To disable your proxy server software:
• If you are running Netscape Navigator: Click
EEddiitt
>>
PPrreeffeerreenncceess
>>
AAddvvaanncceedd
>>
PPrrooxxiieess
> and click
DDiirreecctt CCoonnnneeccttiioonn ttoo tthhee IInntteerrnneett
.
• If you are running Internet Explorer, click
SSttaarrtt
>>
SSeettttiinnggss
>>
CCoonnttrrooll
PPaanneell
>>
IInntteerrnneett OOppttiioonnss
>>
CCoonnnneeccttiioonnss
>>
LLAANN SSeettttiinnggss
. Remove
the checks from all three boxes. Click
OOKK
to continue.
Also, you must disable any
IInntteerrnneett lloogg--oonn ssooffttwwaarree
(such as Ivasion
Winpoet or Enternet 300) and any
ffiirreewwaallll ssooffttwwaarree
(such as
ZoneAlarm and Watchdog) on all of your PCs.