Filter
Top Products
Chapter 4:Installation and
Configuration of the USB
Adapter for Windows 98, 2000,
and ME
This Wireless USB Network Adapter Setup Utility will guide you through the
Install and Uninstall Procedure for Windows 98, 2000, and ME.
Insert the Setup Utility CD into your CD-ROM Drive. The Setup Utility
should run automatically and Figure 4-1 should appear. If it does not, click the
Start button and choose Run. In the box that appears, enter D:\setup.exe
(where “D” is the letter of your CD-ROM drive).
Note to Windows 98, 2000, and ME users: You must install this
software before installation of the hardware.
Figure 4-1
Important for Windows XP users: Do NOT run the Wireless
Network Adapter Setup Utility. Proceed directly to Chapter 5:
Connecting Your Wireless USB Network Adapter.
6
The LED Indicators
Power Green. The Power LED lights up when the Wireless USB
Network Adapter is powered on.
Link Red. The Link LED lights up when the Adapter has an active
connection. If the LED is not on, the Adapter is not inter-
facing with the network.
Wireless USB Network Adapter
Note: Windows 95 and NT do not support the USB Adapter.
Figure 3-3
5
Instant Wireless
TM
Series