Chapter 5: Connecting Your
Wireless USB Network Adapter
To install your Wireless USB Network Adapter, first connect one end of the
USB cable to the Adapter. Then, connect the other end of the USB cable to the
USB port on your desktop or notebook PC. Since the Adapter gets its power
from the PC’s USB port, there is no external power adapter. The Power LED
should light up green when the Adapter is attached and the PC is on.
The USB icon shown below marks a USB port on a PC or device.
The Wireless USB Network Adapter comes with one USB cable. Connect one
end of the USB cable to the USB device on your USB Network Adapter.
Connect the other end to a computer’s USB port.
The picture shows two USB ports as they might appear on
your computer. Note the two USB icons marking the
ports.
Important for Windows 98SE, Me, and 2000 users: You must install
the Adapter’s software before installation of the hardware.
Important for Windows XP users: You must install the Adapter’s
hardware before installation of the software.
9. The InstallShield
Wizard will begin
copying the files. The
bar in the middle of the
screen below shows the
percentage of files
copied.
10. The screen in Figure 4-
10 may appear. Click
on the Yes button if you
want to continue the
installation. Click on
the No button if you do
not want to continue the
installation.
11. After the Wireless USB
Network Adapter Setup
Wizard has been suc-
cessfully installed, the
screen in Figure 4-10
will appear.
You have now completed the
installation of your Wireless
USB Network Adapter
Setup Wizard. To connect
the Wireless USB Network
Adapter, please go to
Chapter 5: Connecting Your
Wireless USB
Network Adapter.
Instant Wireless
TM
Series
11
Figure 4-9
Figure 4-10
Figure 4-11
The USB Icon
Figure 5-1
USB Cabling
Figure 5-2
12
Wireless USB Network Adapter
