Voice Gateway with Router
35
Chapter 6: Using the Web-based Utility
The Voice Tab
Call 1/2 Packets Recv. Displayed here is the number of packets received.
Call 1/2 Bytes Sent. Displayed here is the number of bytes sent.
Call 1/2 Bytes Recv. Displayed here is the number of bytes received.
Call 1/2 Decode Latency. Displayed here is the number of milliseconds for decoder latency.
Call 1/2 Jitter. Displayed here is the number of milliseconds for receiver jitter.
Call 1/2 Round Trip Delay. Displayed here is the number of milliseconds for delay.
Call 1/2 Packets Lost. Displayed here is the number of packets lost.
Call 1/2 Packet Error. Displayed here is the number of invalid packets received.
Call 1/2 Mapped RTP Port. Displayed here is the number of the NAT mapped RTP port.
PSTN Line Status
Hook State. Displayed here is the status of the LINE port. On indicates that it is ready for use, while Off
indicates that it is in use.
Line Voltage. Displayed here is the tip-to-ring voltage of the LINE port.
Loop Current. Displayed is the loop current to the LINE port.
Registration State. Shown here is the status of the line’s registration.
Last Registration At. Shown here are the last date and time the line was registered.
Figure 6-10: PSTN Line Status
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030