Filter
Top Products
13
Chapter 4: Connecting the Wireless-G Exterior Access Point
Hardware Installation
Wireless-G Exterior Access Point
6. Make sure that you properly ground the Access Point.
7. Line up the Access Point’s wall-mount slots with the two screws on the wall. Then, slide the Access Point
down so that the screws fit snugly in the slots.
8. Attach a screw (not included) in each of the two holes on the top of the mounting plate so that the Access
Point is securely mounted to the wall.
9. Connect the other end of the Ethernet network cable to a switch, router, or other device that supports Power
over Ethernet. The Access Point will then be connected to your wired network.
Now that the hardware installation is complete, proceed to "Chapter 5: Setting Up the Wireless-G Exterior Access
Point," for directions on how to configure the Access Point.
Figure 4-4: Attach the Access Point to the Wall
Figure 4-3: Ground the Access Point