Filter
Top Products
22
Chapter 6: Configuring the PrintServer Using the Web-based Utility
The Wireless Tab - Basic
Wireless-G PrintServer for USB 2.0
The Wireless Tab - Basic
This screen allows you to change the PrintServer’s basic wireless settings.
Configuration. The PrintServer’s Regulatory Domain and MAC Address are listed and cannot be changed. In the
SSID field, enter the name of your wireless network. This is the unique name shared by all devices in a wireless
network. The SSID is case-sensitive and should have 32 characters or fewer.
If your network is set to ad-hoc mode, select your network’s channel setting from the Channel No. drop-down
menu.
The Network Type setting shows a choice of two wireless modes. Select Infrastructure if you want the
PrintServer to communicate using an access point or wireless router. Select Ad-Hoc if you want the PrintServer
to communicate without using an access point or wireless router.
Click the Save button to apply your changes, or click Cancel to cancel your changes.
Figure 6-7: Wireless Tab - Basic