Filter
Top Products
23
Chapter 6: Setting Up and Configuring the Router
How to Navigate the Utility
Wireless-N Gigabit Security Router with VPN
• Port Range Triggering. Use this screen to set up triggered ranges and forwarded ranges to allow special
Internet applications to pass through this NAT Router.
• Service. Use this screen to define customized IP applications based on TCP or UDP. The user-defined service
type will be available when defining IP based ACL rules.
VPN
You will use VPN tabs to configure VPN tunnels and accounts to establish a secured channel through Internet.
• IPSec VPN. The VPN Router can create one or multiple tunnels (or secure channel) that each connect between
two endpoints, so that the transmitted data or information between these endpoints is secure.
• VPN Client Accounts. Use this screen to designate VPN clients and their passwords.
• VPN Pass Through. This tab allows you to disable IPSec Passthrough, PPTP Passthrough, and L2TP
Passthrough.
QoS
The Router support two types of Quality of Service (QoS) traffic.
• Application-based QoS. This allows you to assign different traffic priorities for different types of applications.
• Port-based QoS. This allows you to assign traffic priorities on different LAN ports.
Administration
You will use Administration tabs for systems administration purposes.
• Management. You can alter the Router’s password, its access privileges, SNMP settings, and UPnP settings
on this screen.
• Log. This screen allows the configuration of Log settings.
• Diagnostics. On this screen, you can check the connection between the Router and another network device
on the LAN or Internet.
• Config Management. This screen allows you to save and restore Router configuration settings.
• Factory Defaults. If you need to restore the Router’s factory defaults, use this screen.