Linksys SPA2102 Network Card User Manual


 
Phone Adapter with Router
2
Chapter 1: Introduction
What’s in this Guide?
To create your network, install and set up the Phone Adapter. To guide you through the process, use the
instructions in the Quick Installation or this User Guide to help you. These instructions should be all you need to
get the most out of the Phone Adapter with Router.
What’s in this Guide?
This guide covers the basic steps for setting up a network with the Phone Adapter. After going through “Chapter
3: Getting to Know the Phone Adapter,” most users will only need to use the following chapters:
Chapter 4: Getting Started
This chapter instructs you on how to connect and set up the Phone Adapter.
Chapter 6: Using the Web-based Utility
This chapter explains how to configure the Phone Adapter using your web browser and the Phone Adapter’s
Web-based Utility. You will configure the Phone Adapter using the settings provided by your ISP.
When you’re finished with the basic steps, then you are ready to connect to the Internet.
You also have other chapters available for reference:
Chapter 1: Introduction
This chapter describes the Phone Adapter’s applications and this User Guide.
Chapter 2: Networking Basics
This chapter briefly explains how a network functions.
Chapter 5: Using the Interactive Voice Response Menu
This chapter explains how to configure the Phone Adapter’s network settings when you use its Interactive
Voice Response Menu.