Linksys SPA2102 Network Card User Manual


 
Phone Adapter with Router
23
Chapter 6: Using the Web-based Utility
Overview
Chapter 6: Using the Web-based Utility
Overview
The Web-based Utility can be accessed via your web browser through use of a computer on your network. It
offers two levels of access: user and admin (administrator). Your level of access depends on your service
provider’s policies. In most cases you will only have user-level access, so this chapter will cover the user-level
web pages of the Web-based Utility. Also, access to some settings may be protected or blocked, so they cannot
be accidentally changed. For more information, contact your ITSP.
There are two main tabs: Router and Voice. Additional tabs will be available after you click one of the main tabs.
This chapter will describe each web page of the Web-based Utility and each page’s key functions.
Router
Status. This screen displays product and system status information about the Phone Adapter.
WAN Setup. Use this screen to configure the Internet connection, MAC clone, remote management, QoS,
VLAN, and optional settings.
LAN Setup. Use this screen to configure the local IP address, DHCP server, and DHCP lease settings.
Application. On this screen, configure port forwarding, DMZ, multicast, and reserved ports range settings.
NOTE: If your ITSP sent you the Phone Adapter, then it may be pre-configured for you, and you do
not need to change any settings. Refer to the instructions supplied by your service provider for more
information. If you do wish to make changes, follow the instructions in this chapter.