Filter
Top Products
32
Chapter 5: Using the Wireless Network Monitor
Editing a Profile
Wireless-N Business Notebook Adapter
Editing a Profile
Select the profile that you would like to edit in the profile list and click on Edit button. The next screen would be
the Wireless Mode. Following the steps below to complete the task:
1. The Wireless Mode screen shows a choice of two wireless modes. Click the Infrastructure Mode radio
button if you want to connect to a wireless router or access point. Click the Ad-Hoc Mode radio button if you
want to connect to another wireless device directly without using a wireless router or access point. Enter the
SSID for your network.
Infrastructure Mode - Use this mode if you want to connect to a wireless router or access point.
Ad-Hoc Mode - Use this mode if you want to connect to another wireless device directly without using a
wireless router or access point.
SSID - This is the wireless network name that must be used for all the devices in your wireless network. It is
case- sensitive and should be a unique name to help prevent others from entering your network.
Click the Next button to continue, or click the Back button to return to the previous screen.
2. If you chose Infrastructure Mode, go to Step3 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings
screen will appear.
Select the correct operating channel for your wireless network. The channel you choose should match the
channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep
the default setting.
Click the Next button. Click the Back button to change any settings.
Figure 5-24: Editing Profiles - Wireless Mode
Figure 5-25: Editing Profiles - Ad Hoc Mode