Lok8u K8SLI Computer Hardware User Manual


 
K8SLI
9
RAM Module Installation:
The following instructions explains memory module installation for these mainboards:
1. Before install your RAM module, please make sure that the power supply is UNPLUGGED.
Pull the white plastic tabs at both ends of the slot away from the slot.
2. Match the notch on the RAM module with the corresponding pattern in the DIMM slot. This
will ensure that the module will be inserted with the proper orientation.
3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the
module snaps into place.
4. Repeat steps 1, 2 & 3 for the remaining RAM modules.
The pictures above are for reference only. Your actual
installation may vary slightly from the pictures.
Attention: There’s a little red led beside the DIMM slots. If
it’s on, that means the AC power is connected. DO NOT
install the RAM module when the led is on.