Filter
Top Products
K8SLI
27
Boot Up Floppy Seek
When Enabled, the BIOS tests (seeks) floppy drives to determine whether they have 40 or 80 tracks.
Only 360-KB floppy drives have 40 tracks. Drives with 720KB, 1.2MB, and 1.44MB capacity all
have 80 tracks. Because very few modern PCs have 40-track floppy drives, we recommend that you
set this field to “Disabled”.
Options: Enabled、Disabled (default)
Advanced BIOS Features
Virus Warning
Set the virus warning feature for IDE hard disk boot sector protection. If the function is enabled, any
attempt to write data into this area will cause a beep and warning message display on screen. Options:
Disabled (default)、Enabled
CPU Internal Cache
Make CPU internal cache active or inactive. System performance may degrade if you disable this
item. Options: Enabled (default)、Disable.
External Cache
This option allows you to enable or disable “Level 2” secondary cache on the CPU to enhance
performance. Options: Enabled (default)、Disabled
Quick Power On Self Test
Allow the system to skip certain tests while booting. This will speed up the boot process.
Options: Enabled (default)、Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose “Enabled” to assign physical drive B to logical drive A
and vice-versa. Options: Disabled (default)、Enabled.
Boot Up NumLock Status
Selects the power on state for NumLock.
Options: On (default) Numpad keys are number keys.
Off Numpad keys are arrow keys.
Typematic Rate Setting
When “Enabled”, the “typematic rate” and “typematic delay” can be configured. Typematic Rate
determines the keystroke repeat rate used by the keyboard controller. Options: Disabled (default)、
Enabled
Typematic Rate (Chars/Sec)
The rate at which a character repeats when you hold down a key.
Options: 6 (default)、8、10、12、15、20、24、30