Filter
Top Products
LSI22902/22903 Host Adapter to Intel ISP1100 Internet Server 15
Figure 13 SCSI Cable Routing
Step 9. Install both drive bays by positioning the front tabs in their
respective positions with the rear of the bay over the chassis
snaptop standoffs.
Step 10. Firmly press down on the rear of the bay until the bay “snaps”
securely into position on the standoffs.
Step 11. Attach the SCSI and power cable for each drive.
The SCSI cable terminator should position itself between the
two drive bays.
Refer to Figure 14 for a photograph showing drive bay
installation.