Filter
Top Products
3-8 Technical Specifications
Copyright © 2001 by LSI Logic Corporation. All rights reserved.
3.2.3 The LED Interface
The LSI20160 LED interface is a four-wire arrangement that allows you
to connect an LED harness to the board. The GPIO0_FETCH line has a
maximum output low voltage of 0.4 V and minimum output low current of
16 mA. It is driven low to complete the circuit when a harness with an
LED is attached. The J3 connector provides the LED connection on the
LSI20160. Table 3.5 lists the signal and pin numbers for the LED
interface.
Table 3.5 LED Connector J3 Pinout
Signal Name Pin
A_LED+ 1
A_LED− 2
A_LED− 3
A_LED+ 4