Filter
Top Products
4-16 BIOS Features
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
Step 2. From the displayed list, select a device to mark persistent as
shown in Figure 4.2.
Figure 4.2 Select Device
Step 3. Type ^Y (Ctrl-Y) to insert disk name in the command line as
shown in Figure 4.3.
Figure 4.3 Inserting Disk Name in Command Line
Note: The OpenBoot BIOS (Fcode) provides help when you enter
a command that does contain the proper arguments. In this
case, OpenBoot responds with usage syntax.
Figure 4.4 Setting Device 0 as Persistent
Note: The command sequence in Figure 4.4 records an entry for
device 0, as item 0 in the persistent device list.
Figure 4.5 Clearing Persistent Device Map
Note: The command sequence in Figure 4.5 may be used to clear
an entry in the persistent device map.
Entry 1 has been deleted from the table, and the table is now empty.
/pci@1f,0/pci@1/IntraServer,fc@2/disk has been selected.
ok select /pci@1f,0/pci@1/IntraServer,fc@2
ok show-children
MPT Firmware Version 1.02.12
Target 0
Unit 0 Disk SEAGATE ST39173FC 6615
WWN 200000203710c4e8 PortID a3