Filter
Top Products
Installation Steps 6-17
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Figure 6.8 Installing the MegaRAID SCSI 320-2 Controller
6.2.9 Step 9: Connect SCSI Devices
Use SCSI cables to connect SCSI devices to the MegaRAID SCSI 320-1.
The MegaRAID SCSI 320-2 has the following connectors:
• Two internal high-density 68-pin SCSI connectors: J7 is for SCSI
channel 0, J8 is for SCSI channel 1.
• Two external very high-density 68-pin SCSI connector: J9 is for SCSI
channel 0, J19 is for SCSI channel 1.
32-bit slots
64-bit slots
(3.3 V)
(
5 V
)
Bracket Screw