Filter
Top Products
3
Installation Guide
Installation Guide
4) Remove the blank cover plate for the ACC1 slot (next to the SYNC card) by removing 1 Phillips-
head screw. Save the screw for installing the OPT•24.
REAR PANEL
FRONT PANEL
REAR PANEL
®
MACKIE DESIGNS. ™
© 2000
4) Remove Screw and
ACC1 Slot Cover Plate
5) Unplug the 2 ribbon cables from the Sync card. Squeeze the tabs on the sides of the connectors and
gently wiggle from side to side to release them from their sockets.
REAR PANEL
FRONT PANEL
REAR PANEL
®
MACKIE DESIGNS. ™
© 2000
5B) Pull Ribbon Cables back
and out of the way
5A) Unplug Ribbon Cables
from Sync Card