Magma PCIHIF64LP Computer Hardware User Manual


 
MAGMA
2 Chapter 2 Installation
Chapter 2 Hardware Installation
IMPORTANT
It is recommended that you refer to the separate E
xpansion
Chassis User’s Guide included with your Magma Expansion
Chassis product for complete system installation information. The
following installation instructions briefly explain the connection of
the host card to the host computer only.
Install Host Card
Power down your computer. Use the procedures for shutting down your
operating system and shutting off power to your system provided in your
owner’s manual or system documentation.
After the host computer is off and all power cords disconnected, remove
the cover and insert the PCI host card into an appropriate vacant PCI
slot by gently pushing the card until it is firmly seated.
Notice that the standard PCI slots are located at a closer distance to the
edge of the computer’s motherboard than are the PCI Express slots.
You should also be aware that some host computers may also contain
3.3V, 5V, and/or Universal PCI slots. Your PCI Host Card can only be
inserted in 3.3V or Universal PCI slots. DO NOT FORCE IT into a slot.
Check to be sure you are not trying to install it into a 5V PCI slot, or a
PCIe slot. Once you have the host card firmly inserted into the correct
PCI slot secure the card to the slot with a mounting screw.