Manhattan Computer Products 160377 Computer Hardware User Manual


  Open as PDF
of 16
 
7
Creating Mirrored Sets (RAID 1)
1. As the BIOS boots, press CTRL+S or F4 to enter the rAID BIOS utility.
2. Select "Create RAID set." Press Enter.
3. Select "RAID 1," then press Enter.
4. Select "Auto configuration." Press Enter.
5. Press Y to save your settings.
6. Press CTRL+E and then press Y to exit the setup.
7. Continue with conventional Fdisk and Format steps as if installing a conventional hard drive.
8. Your RAID configuration is complete. Proceed to Software Installation.
Creating a Mirrored-Striped Set (RAID 10)
1. As the BIOS boots, press CTRL+S or F4 to enter the RAID BIOS utility.
2. Select "Create RAID set." Press F2.
3. Select "RAID 10," then press Enter.
4. Select "Auto configuration." Press Enter.
5. Press Y and then press ESC to exit the setup.
7. Continue with conventional Fdisk and Format steps as if installing a conventional hard drive.
8. Your RAID configuration is complete. Proceed to Software Installation.
 previous next