Filter
Top Products
9
4. Select "Spare Drives." Press Enter.
5. Select "RAID size." Press Enter.
6. Press Y to save your settings.
Deleting RAID Sets
1. As the BIOS boots, press CTRL+S or F4 to enter the RAID BIOS utility.
2. Select "Delete RAID set." Press Enter.
3. Answer "Y" to remove the RAID set. If the RAID set being deleted is a Striped set, then all of
the data will be lost. If the set being deleted is a Mirrored set, then the data will remain
intact and accessible on both drives.
Rebuilding Mirrored Sets (RAID 1)
1. After replacing the failed hard drives, boot the BIOS, then press CTRL+S or F4 to enter the
RAID BIOS utility.
2. Select "Rebuild RAID 1 set." Press Enter.
3. Select "Rebuild Hard Drive." Press Enter.
4. Answer "Y" to rebuild the Mirrored set of the hard drive.