Filter
Top Products
INSTALLATION: WINDOWS 2000/XP
Driver Installation
Installing the device driver enables your computer’s operating system
to recognize the Hi-Speed USB 2.0 DVI Converter once it’s connected.
Check your operating system and refer to the appropriate installation
procedure to begin installing the device driver. Make sure the converter
is unplugged from your PC or notebook computer before executing the
setup program.
1. Insert the driver CD into the CD-ROM drive. The setup program
should be launched automatically. If the setup program does not
begin automatically, go to Start, then Run, then double-click “D:\
Setup.exe” (where D: is the path of your CD-ROM drive).
2. When the Welcome
screen of the InstallShield
Wizard displays, click
“Next” to continue.
3. When the License
Agreement screen
displays, read it and
select “I accept the terms
of the license agreement.”
Click “Next” to accept the
license agreement and
continue with the install.
4. Connect the external display device (monitor/projector) to the DVI
connector of the converter and switch the display device on.
4
INSTALLATION: WINDOWS 2000/XP