7
ENGLISH
Operate the remote controller within a distance of approximately 5m from the IR sensor (remote sensor)
on the projector.
Remote control operation may not be possible if the remote control unit’s transmitter is not pointing in the
direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor.
60
150
5m
5m
60
5m
60
5m
VP-12S4
VP-12S4
60
5m
VP-12S4
Remote Controller Operational Range
Remote
Controller
Remote
Controller
Remote
Controller
Remote
Controller
Remote
Controller
1. Take the cover off the battery case on the
remote control backside.
2. Insert two AA size batteries.
Make sure the polarities match the + and –
marks inside the battery compartment.
3. Reattach the battery case cover as before.
Notes :
•
Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
CAUTIONS ON BATTERIES
• Use “AA” type batteries in this remote
control unit.
• If the remote control unit does not operate
from close to the main unit, replace the
batteries with new ones, even if less then a
year has passed.
• The included battery is only for verifying
operation. Replace it with a new battery as
soon as possible.
• When inserting the batteries, be careful to
do so in the proper direction, following the +
and - marks in the remote control unit’s
battery compartment.
• To prevent damage or battery fluid leakage:
- Do not use a new battery with an old one.
- Do not use two different types of batteries.
- Do not short-circuit, disassemble, heat or
dispose of batteries in flames.
• Remove the batteries when not planning to
use the remote control unit for a long period
of time.
• If the batteries should leak, carefully wipe off
the fluid from the inside of the battery
compartment, then insert new batteries.
• When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules that
apply in your country or area.
AA size batteries
Battery case cover
Battery case cover
Preparing the Remote Controller