20
ENGLISH
– Cinema
Auto : Automatically selects the cinema mode when a video signal is input.
NTSC: 3-2 pull down, PAL: 2-2 pull down
Off : Pull-down processing is not performed.
– VCR Mode
On : A projector is forced into the intra-field only deinterlacing mode.
Off : A projector is used with external field memories and operates in the full set of deinterlacing
modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing
using 3:2 pulldown detection (2:2 pulldown for 625/50 sources).
– Black level
Select the black level by a video source.
– FRC (Frame Rate Conversion)
Auto : Frame Rate Conversion function is basically off. However FRC turns on automatically
depending on vertical frequency of input signal.
On : Frame Rate Conversion function is “On”. (60Hz fixed)
– Picture Shift V
When Aspect on the Picture Adjust menu is set to “Zoom”, this setting allows the user to move the
projected image vertically in order to see parts on the image not appearing on the screen.
– Luminance Gain
This menu allows the users to set the luminance gain.
– Chroma Delay
This menu allows the users to set the chrominance delay.
Notes :
• There are some parameters can not adjust according to input signal.
• The settings made in Fine Menu 2 are saved in each currently selected input signal source.
Standard 1
Cinema
VCR Mode
Black Level
Auto
On
0 IRE
FRC Auto
0
0
0
Picture Shift V
Luminance Gain
Chroma Delay
Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
Display
OSD/Blanking
Config.
Fine Menu 2
By adjusting this Fine Menu, you can make fine picture adjustment.
– Sharpness
Adjust the sharpness.
– Noise Reduction
Adjust the noise reduction.
– R Gain
This menu allows the users to set the gain for red.
– G Gain
This menu allows the users to set the gain for green.
– B Gain
This menu allows the users to set the gain for blue.
– R Bias
This menu allows the users to set the bias for red.
– G Bias
This menu allows the users to set the bias for green.
– B Bias
This menu allows the users to set the bias for blue.
Note :
• The settings made in Fine Menu 1 are saved in the currently selected Picture Mode index (Default
excluded).
Standard 1
Sharpness
Noise Reduction
R Gain
G Gain
B Gain
0
0
R Bias
G Bias
B Bias
0
0
0
0
0
0
Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
Display
OSD/Blanking
Config.
Fine Menu 1
Adjustments
-25
Ô
0
Ô
25
050
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
Item
Sharpness
Noise Reduction
R Gain
G Gain
B Gain
R Bias
G Bias
B Bias
Item
Cinema
VCR Mode
Black level
FRC
Picture Shift V
Luminance Gain
Chroma Delay
Adjustments
Auto, Off
On, Off
0 IRE, 7.5 IRE /Normal, Expand (For HDMI input)
Auto, On
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-5
Ô
0
Ô
5