Filter
Top Products
23
ENGLISH
NO SIGNAL VALID SIGNAL
ANY INPUT
VIDEO or S-VIDEO COMPONENT
NTSC PAL/SECAM 480i/576i 480p/576p 480i/576i 480p/576p Other
1080i/720p/
1080p/540p
HDMI CSC HDMI 1
● –––––– ––●
CSC HDMI 2 ● –––––– ––●
Deep Color HDMI 1 ● –––– ––––●
Deep Color HDMI 2 ● –––– ––––●
Display Keystone ●●●●● ●●●● ●
Scale – ●●●●●● ●●●
Width – ●●●●●●●● ●
Position H – ●●●●●● ●●●
Position V – ●●●●●● ●●●
Installation ●●●●● ●●●● ●
OSD/Blanking Menu Position ●●●●● ●●●● ●
Language ●●●●●●● ●●●
Status Info. ●●●●● ●●●● ●
Power-OFF Confirm. ● ●●●●●● ●●●
Blanking Memory – ●●●● ●●●● ●
Blanking Top – *8 *8 *8 *8 *8 *8 *8 *8 *8
Blanking Bottom – *8 *8 *8 *8 *8 *8 *8 *8 *8
Blanking Left – *8 *8 *8 *8 *8 *8 *8 *8 *8
Blanking Right – *8 *8 *8 *8 *8 *8 *8 *8 *8
Configuration Auto Power Off
●●●●● ●●●● ●
Trigger 2 Full ●●●●●●● ●●●
Trigger 2 Normal ●●●●● ●●●● ●
Trigger 2 Zoom ●●●●● ●●●● ●
Trigger 2 V-Strech ●●●●●●● ●●●
Trigger 2 Through ● ●●●●●●●● ●
Remote Control ●●●●● ●●●● ●
Reset Lamp Life ● ●●●●●● ●●●
Reset All ●●●●●●● ●●●
*1 Can be selected only when User is selected for the Picture Mode.
*2 On only when interlaced signals are input. (Off for progressive signals.)
*3 On only when 1035i / 1080i signals are input.
*4 On when Aspect is set to V-Stretch for HD signals. For other signals, On when Aspect is set to Zoom or V-Stretch.
*5 On when the RGB/HD Adjust mode is set to Memory.
*6 On when the RGB/HD Adjust mode is set to Memory. However, as an exception, it is Off when Aspect is set to Through or V-Stretch.
*7 On when 480i/p or 576i/p signals are input.
*8 On when Blanking Memory is selected for OSD/Blanking.
*9 Cannot be selected when the default is selected for Picture Mode.
*10 Can be selected when the input signal is 540p, 720p, 1035i, 1080i, or 1080p.
*11 Off when the input signal is 480i/p or 576i/p.