Filter
Top Products
®®
3.1.2 Installation Description
This entry al
enter any information you like here, such as the date the unit was installed, or the location in
which it was installed, for later reference. Tools such as Maretron N2KAnalyzer
®
allow you to
view these values later. The default installation description is blank text.
3.1.3 Restore Factory Defaults
This option restores all settings on the IPG100 device to their factory default state.
3.2 De
Program this whic his device. Maretron display
products wil
label is blan
3.3 N2K
rogram this para clients must be
er
®
Connection
Configuring thi
Maretron Cloud
embedded N2K
connection, pro e)
ices. If you do not
ish to use Maretr actory default), to
3.5 Confi
his parameter tion settings
ault value), the
will ob Mask, Default
server on the local area network. Most routers have
sult the user documentation for your network’s
to “No” and manually
onfigure the IP Address (section 3.6), Subnet Mask (section 3.7), Default Gateway (section
lows you to modify the NMEA 2000
®
installation description text strings. You can
ice Label v
parameter with a tex g h identifies tt strin
l display this label text when you are selecting data to display. The default device
k.
Server
®
Password
P meter with a text password. Any connecting N2KView
®
ame password in the “Connections Settings -> N2KServ
®
software. The default password is blank.
has an Internet connection, and you have subscribed to Maretron Cloud Serv
on Cloud services, set this parameter to “Disabled” (f
programmed with the s
->Pas word” field in ths e N2KView
3.4 Maretron Cloud Services
s entry to “Enable” allows the IPG100 to attempt a server connection to
Services. You may then use Maretron Cloud Services to connect to the
Server and access your boat’s network from anywhere with an Internet
vided that your boat has an Internet connection, your client (PC or smartphon
w
prevent the IPG100 from attempting to contact Maretron Cloud Services.
guring DHCP
determines whether or not the IPG100 obtains its LAN connecT
from a DHCP server on the local area network. When set to “Yes” (the def
PG100 tain all necessary connection settings (IP Address, Subnet I
Gateway, and Default DNS) from a DHCP
the capability to act as a DHCP server. Con
router for details.
If there is no DHCP server on the local area network (or if the IPG100 is connected directly to
a DSM800 or directly to an MBB100), set the “DHCP” parameter
c
3.8), Default DNS (section 3.9).
Revision 1.2 Page 11