Filter
Top Products
5
6. Then ’OK’ again.
7
. Click ’Save’.
8. If it asks you, click ’Replace’.
You should now have a final window showing your current Studio Setup. If ’Quicktime Music’ is crossed out, you should double click on
it, then click in the ’on’ circle to enable it. Then click ’OK’. Now you’re ready to go. Just make sure your Keystation 49e keyboard is
selected as the MIDI input in your music software.
Installing in Windows 98 or ME
1. Power up your PC.
2
. Insert the Keystation 49e Installer CD-ROM.
Open My Computer or Windows Explorer to locate your CD ROM drive. Click on the folder labeled Keystation 49e.
3. Open the Keystation 49e folder and click on the installer icon.
4. Follow instructions on screen.
5. When finished exit setup.
6. Switch on the Keystation 49e.
W
indows will proceed with the installation of a USB driver and a MIDI driver. Once completed, you are ready to go. Windows may ask
you to restart your computer - if so, click “Restart”.
Installing in Windows 2000
1. Power up your PC.
2. Insert the Keystation 49e Installer CD-ROM. Open My Computer or Windows Explorer to locate your CD ROM drive. Click on the folder
labeled Keystation 49e.
3. Open the Keystation 49e folder and click on the installer icon.
4. Follow instructions on screen.
5. When finished exit setup.
6. Switch on the Keystation 49e keyboard. Windows will automatically recognize the keyboard and ask for the Keystation 49e
Installer CD-ROM.
7. Select the CD-ROM drive and click OK. Windows will then ask you to select the CD-ROM drive again for the MIDI driver.
8. If Windows reports the drivers have not been digitally signed, click on ’Continue Installation’.
9. Select the drive once more.
10. Click OK and you are ready to go (Windows may ask you to restart your computer - if so, click “Restart”).
Getting Started
Even though you have successfully completed the installation pr
ocess, please note that when you press a key you will not hear any
sound. This is because pr
essing a key causes the keyboar
d to send out MIDI data. MIDI data gives instr
uctions on how a sound should
play, but in order to actually hear that sound, you need to configure your music software to read the MIDI data being sent from the
Keystation 49e and play the sound back accordingly. This set up will more than likely entail going into an Options or Device Set-Up
menu in your music software application and selecting the appropriate device. The Keystation 49e should appear under the name
“USB Audio Device” for Windows XP or as “eKeys-49 USB MIDI Keyboard” for other Operating Systems in the MIDI devices section of
your music softwar
e application. Please consult the manual that came with your software for the pr
oper set up procedure.
Key Names
Each white key on the Keystation 49e is labeled with a letter and a number. The letter represents the note you play, and the number
represents the octave (the concept of an “octave” is explained in the next section).
Although the black keys are not labeled, they also have names. For example, the name of a black key can be something like F# 4 or
Eb2.
If a (black) key letter name is listed with a # sign, it is referring to the black key above the white key with the same letter name. For
example F# 3 refers to the black key above (white key) F3. If listed with a b sign, it is referring to the black key below the white note
with that letter name. For example, Eb3 refers to the black key below (white key) E3. As a result, the name of the black key between
C3 and D3 is both C#3 and Db3.