Maxon Telecom MM-5100 Network Card User Manual


 
MM-5100 Windows Setup Manual 090803 NZ Page 10 of 44 4/09/2003
When the software starts the screen will look similar to this:
If you are NOT intending to use the Maxon Phone UI software and only want to load the
drivers then you may install the drivers only.
If USB is not present on your PC leave ‘Install USB Driver’ un-ticked.
If a Serial port is not present on your PC leave ‘Install Serial Driver’ un-ticked.
If you ticked ‘Install USB Driver’ observe the following alert, then click “OK”.