MaxTech 28 Network Card User Manual


 
5
2.5 Using the Fax Capabilities of the Modem
Your modem has built-in advanced FAX functions.
The commands to control these functions are software driven
and are not normally accessible to the user. Consult your
FAX software manual about procedures on using FAX
features.
2.6 Testing Your Modem After Installation
In order to test your modem you should be familiar
with your communication software. Load and set up your
communication software and enter into “terminal mode.”
Make sure that the COM Port and IRQ settings of the modem
match the software. Type AT on your terminal screen and
press ENTER. You may see “AATT” or nothing on the
screen. In either case, the modem should respond with an OK
or 0. If it does not, please refer to Section 2.4 for information
on COM Ports and IRQ’s or Section 6 for troubleshooting
information.
2.7 Using Your Modem
The communication software included with your mo-
dem product provides a user friendly interface to access the
fax and data functions of your modem. This software should
be sufficient for all of your communication needs. There
may be times when you need to access the modem manually
via modem commands. Read Section 3 for a summary
description of the modem command set before manually
accessing the modem. You may want to read the software
manual first, however, as the software may already provide
a user friendly method of accessing the functions you need
(i.e. dialing or answering calls).
2.8 Where To Go From Here
You should familiarize yourself with the functions
available from the included software by reading its manual.
You will be accessing most, if not all, of the modem's
functions from this software. You may also use any other
commercially available communication software with the
modem. Read Section 3 ONLY if you are interested in
accessing the modem manually, and not through the included
software. Section 4 and 5 contain reference material, and can
be skipped. If you have difficulties getting your modem to
work, read Section 6, Troubleshooting to find answers to