MaxTech 28 Network Card User Manual


 
7
B6 2400 bps connection only
B7 4800 bps connection only
B8 9600 bps connection only
B9 14400 bps connection only
B10 16800 bps connection only
B11 19200 bps connection only
B12 21600 bps connection only
B13 24000 bps connection only
B14 26400 bps connection only
B15 28800 bps connection only
D_ 0 - 9, A-D, # and *
L last number redial
P pulse dialing
T touch-tone dialing
W wait for second dial tone
, pause
@ wait for five seconds of silence
! flash
; return to Command Mode after dialing
DS=n Dial one of the four telephone numbers (n=0-3) stored
in the modem’s non-volatile memory.
E0 Commands are not echoed
E1 Commands are echoed
+++ Escape Characters - Switch from Data Mode to
Command Mode
H0 Force modem on-hook (hang up)
H1 Force modem off-hook (make busy)
I0 Display product-identification code
I1 Factory ROM checksum test
I2 Internal memory test
I3 Firmware ID
I4 Reserved ID
L0 Low speaker volume
L1 Low speaker volume
L2 Medium speaker volume
L3 High speaker volume
M0 Internal speaker off
M1 Internal speaker on until carrier detected
M2 Internal speaker always on
M3 Internal speaker on until carrier detected and off while
dialing
O0 Return to Data Mode