MaxTech 800 Network Card User Manual


 
17
Section Seven - Specifications
Communication Std. V.34, V.FC, V.32bis, V.32, V.29, V.27ter,
V.22bis, V.23, V.22, V.21, V.17, Bell212/
103
Data Compression: V.42bis/MNP5
Error Correction: V.42/MNP2-4
Host Interface: 8 bit PC bus
COM ports: 1, 2, 3, 4
IRQ lines: 2, 3, 4, 5
FAX Group: Group III Send/Receive Standard
FAX Command set: EIA/TIA-578 Service Class 1, EIA/TIA-
SP2388 Service Class 2
Transmit level: -12 dBm +/- 1 dB
Receiver Sensitivity: -43 dBm
UART: 16550 compatible
Data format: 300-115200 bps
Power: 2.5 W
Temperature: 0 to 55 degrees C (Operating)
Section Eight - Support and Service
In the unlikely event you experience difficulty in the use of this
product, we suggest you: (1) consult the Troubleshooting section
of this guide and (2) consult with your dealer. To obtain service for
this product, follow the Return Merchandise Authorization Proce-
dure as outlined in the Warranty card.
Section Nine - FCC , DOC & Other Notices
9.1 FCC Compliance
This equipment complies with Part 68 of the FCC Rules. On this
equipment is a label that contains, among other information, the
FCC registration number and Ringer Equivalence Number (REN)
for this equipment. You must, upon request, provide this informa-
tion to your telephone company.
If your telephone equipment causes harm to the telephone net-
work, the Telephone Company may discontinue your service
temporarily. If possible, they will notify in advance. But, if
advance notice isn’t practical, you will be notified as soon as
possible. You will be informed of your right to file a complaint
with the FCC.
Your telephone company may make changes in its facilities,
equipment, operations, or procedures that could affect proper