Filter
Top Products
2
Section Two - Installation
This section will provide step by step
instructions on how to install your new PCMCIA
network adapter. Installation of this network
adapter is a two-step process consisting of actual
hardware installation and PCMCIA device driver
installation/configuration. This network adapter
is designed to be software configurable using the
included installation diskette.
2.1 Unpacking Your Network Adapter
Two types of network adapter cards are
available. Before you proceed, determine the model
you have purchased. The following table summa-
rizes the contents and features for your PCMCIA
Ethernet products:
Model
PCN PCN
2000T 2000BT
PCMCIA Card x x
RJ-45 Coupler x
BNC/RJ-45 Coupler x
LEDs x x
BNC T-connector x
Driver diskette x x
User's Guide x x
2.2 Hardware Installation
Installation of this adapter requires ac-
cessing and configuring your PCMCIA Type II
slot. All Maxtech PCMCIA products feature a
built-in static electricity discharge mechanism,
however, you should exercise all necessary precau-