MaxTech PCN2000 Series Network Card User Manual


 
5
driver diskette. Consult the README file on the
driver diskette for specific instructions on how to
install the driver.
Note: If you are unable to obtain Socket
Service and Card Service from your computer
manufacturer, you may still be able to use the
PCMCIA Ethernet adapter with the included
PCMCIA device driver. Consult the README
file to determine if your computer is supported in
this configuration and for instructions on how to
proceed.
The PCMCIA Ethernet adapter uses the
memory region D400-D7FF to read Ethernet ID
and other information from on-board flash ROM.
Please be certain that this memory region is ex-
cluded from usage by other programs, including
memory managers. Memory management is a
component of Microsoft DOS and Windows and is
used extensively. If you are running a Microsoft
memory manager, make sure that the x=D400-
D7FF parameter appears in the
Device=EMM386.EXE entry in your
CONFIG.SYS.
Example:
DEVICE=EMM386.EXE NOEMS X=D400-D7FF
Since Socket Service and Card Service
generally require 4-8 KB of contiguous space in
the Upper Memory Blocks, we recommend using
the following entry:
Example:
DEVICE=EMM386.EXE NOEMS X=D000-DFFF
If you do not have a
DEVICE=EMM386.EXE entry in your