Filter
Top Products
10
tion for the adapter. Click “OK” to install the adapter.
Windows 95 may request its own installation disks
for some files. Insert the Windows 95 disks as
required. When all necessary files are copied, the
adapter is configured. Restart Windows 95 as
prompted.
3.1.2 Windows 95 Release 4.00.950 B
When Windows 95 starts for the first time after card
installation, it detects the card and displays the
Update Device Driver Wizard.
Insert the driver disk into the disk drive and click
“Next.” Windows will search for the driver on the
driver disk. If you need to enter the location of the
driver, click “Other Location,” type A:\WIN95 (or
B:\WIN95) in the entry box and click “OK”. Click
“Finish.”
Windows 95 may request its own installation disks
or CD for some files. Insert the Windows 95 disks
or CD as required. When all necessary files are
copied, the adapter is configured. Restart Win-
dows 95 as prompted.
Section Four - Using the Remote
Boot ROM
A Remote Boot ROM allows the PC to load the
operating system over the network on diskless
workstations. Be certain that the Boot ROM has
been properly installed (Refer to Section 2.2.1) and
enabled on both PnP and Legacy systems. Refer to
section 2.4.2 for instructions.
Once the Boot ROM is installed and enabled, follow
the Remote Boot Workstation installation proce-
dure given in your network operating system manual
(i.e. create a Boot Image on the server for Novell
networks, or start remote booting services on LAN
Manager networks, etc.).