MaxTech XT7800 Computer Monitor User Manual


 
7
Data Area 12.75 x 9.625 in.
Preset Display Modes
Mode Resolution V. Frequency H. Frequency
VGA 640 x 350 70 Hz 31.47 KHz
VGA 640 x 400 70 Hz 31.47 KHz
VGA 640 x 480 60 Hz 31.47 KHz
SVGA 800 x 600 56 Hz 35.16 KHz
8514A 1024 x 768 87 Hz 35.52 KHz
VGA 640 x 350 84 Hz 37.86 KHz
VGA 640 x 400 84 Hz 37.86 KHz
VGA 640 x 480 84 Hz 37.86 KHz
SVGA 800 x 600 72 Hz 48.09 KHz
SVGA 800 x 600 60 Hz 37.88 KHz
SVGA 800 x 600 72 Hz 48.08 KHz
Ultra VGA 1024 x 768 60 Hz 48.37 KHz
Ultra VGA 1024 x 768 70 Hz 56.48 KHz
Ultra VGA 1280 x 1024 60 Hz 64.31 KHz
Synchronization Horizontal: 30-66 KHz
Vertical: 50-90 Hz
Deflection
Geometric distortion H<=2.5mm, V<=2.5mm
Linearity distortion H<=10%, V<=8%
Pincushion distortion <=2mm
High voltage regulation H<=4mm, V<=4mm(0-25FL)
Low radiation MPR-II specification
Front controls Power, Brightness, Contrast, Memory Recall, Adj+, Adj-,
Cursor+, Cursor-, Status/Save, Degauss
On Screen Display Horizontal-Size, Horizontal-Position, Vertical-Size, Vertical-
Position, Pincushion, RGB Color Adjustments
Rear Control Display Tilt
Power saving
Display Power Management Signaling (DPMS)
SUSPEND mode 25W (Max.)
OFF mode 5W (Max.)
Input voltage 100-240VAC, 50/60 Hz
Power consumption 120W maximum
Operating Temperature 5°-35°C
Environment Humidity 20-90% (non-condensing)
Altitude 0-10,000ft.
Connector BNC, 15 Pin D-Sub
Dimensions 16.59 x 16.60 x 16.61
Specifications subject to change without notice.
Appendix B - Two Year Warranty
MaxTech warrants to the original buyer of this product against defects in material and
workmanship for two years from the date of purchase.
Except as specified below, this warranty covers all defects in material or workmanship
in this product. The following are not covered by the warranty:
1. Any product which is not distributed in North America by MaxTech or which is not
purchased in North America from an authorized MaxTech Dealer.