Filter
Top Products
INTERFACE COMMANDS
7 – 6
Set Feature CommandsSet Feature Commands
Set Feature CommandsSet Feature Commands
Set Feature Commands
Set Features ModeSet Features Mode
Set Features ModeSet Features Mode
Set Features Mode
Enables or disables features supported by the drive. When the drive receives this command it:
1. Sets BSY,
2. Checks the contents of the Features register,
3. Clears BSY and
4. Generates an interrupt.
If the value of the register is not a feature supported by the drive, the command is aborted.
The acceptable values in the Features register are defined as follows:
EULAVNOITPIRCSED
*h20ehcacetirwdelbanE
h30retsigertnuoCrotceSnieulavnodesabedomrefsnartteS
h44 ehtnideificepssdnammocgnoLetirW/gnoLdaeRnodedneppaatadfohtgneL
noitamrofnieciveDyfitnedI
h55erutaefdaeha-kooldaerelbasiD
*h66stluafedno-rewopotgnitreverelbasiD
h28ehcacetirwelbasiD
*hAAerutaefdaeha-kooldaerelbanE
*hBB sdnammocgnoLetirW/gnoLdaeRnodedneppaatadcificepsrotxaMfosetyb4
hCCstluafedno-rewopotgnitreverelbanE
*.tluafedybpurewoptadelbanE