Filter
Top Products
2. Drill four 5mm holes through the wall for each bracket, or if there is a stud behind the wall where
you are putting the bracket, drill four 5mm holes through the wall and into the studs for each
bracket. See below figure 3 for lengths.
3. Secure the Hook Assemblies (A) to the TV by inserting the two screws for each Hook Assembly in
the pre-drilled holes in the rear of the set as shown in figure 4.
4. With a helper’s assistance, place the Hook Assemblies (A) carefully onto the Brackets (B) and slide
down until it is secure.
CAUTION: You must make sure the brackets are very securely screwed into the wall and the Hook
Assemblies are securely attached to the TV before securing the TV to the wall.
16
WALL MOUNTING THE UNIT (CONTINUED)
AA
BB
A
A
B
B
FIGURE 4
FIGURE 3