Filter
Top Products
1 2 3 4 5 6 7
11
10 1312 148 9
1. POWER Button - Press to turn the TV on; the
POWER indicator will light green and picture will
appear in approximately five seconds. Press again
to turn the TV off; the Power indicator will light red.
2. CHANNEL Down Button - Press to select a lower
numbered channel.
3. CHANNEL Up Button - Press to select a higher
numbered channel.
4. VOLUME Down Button - Press to lower the
volume.
5. VOLUME Up Button - Press to raise the volume.
6. MENU Button - Press to access the On-Screen
menu.
7. TV/VIDEO/PC Button - Press to switch between
the TV and the video inputs.
8. Left Speaker
9. Screen
10. Base Stand
11. REMOTE SENSOR
12. POWER Indicator
- Lights green when the unit is
warming up or is on, and lights red when the unit
is off.
13. AC Jack (Rear of Unit)
14. Right Speaker
4
LOCATION OF CONTROLS
POWER SOURCE
FRONT
To operate the unit using AC power, connect the AC Adapter to the AC jack on the
rear of the unit, then connect the AC adapter to a wall outlet having 120V AC, 60Hz
only.
NOTE: If the AC adapter’s plug does not fit into a nonpolarized outlet, do not file or
cut the wide blade.
CAUTION: Use only the AC adapter provided with this unit. Using another AC
adapter may damage the unit. When not using AC power, disconnect the AC adapter
from the wall outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet hands.