Filter
Top Products
Mercury 8/16 User’s Manual
17
Figure 6-4. On Screen Display
There is an enter password window showed out when you select this item
and then press the Enter. The maximum password is eight digits. After you
key in the password already and press the Enter key, there is another
window for confirming your typed password.
Figure 6-5. On Screen Display
You need to re-type the password again for rechecking your previous key-in
password is matched or not.
Figure 6-6. On Screen Display
d. The “CONSOLE ON/OFF “means to manage the console of KVM switch. If
you select “CONSOLE ON “, it means that any user can use the console. If
you select “CONSOLE OFF “(factory default OFF state), it means that any
user will not be allowed to use the console unless you enter the password.
When you enter the password already and pass the KVM switch
authentication, the CONSOLE will be set to ON. After you finish using KVM
switch, do not forget to set CONSOLE ON state to OFF state. Besides, if
current CONSOLE is ON state and you reset KVM switch, the CONSOLE
will be set up ON state back to OFF state.
e. If you want OSD returning back to factory default value, you can execute
ENTER PASSWORD :
ESC : QUIT ENTER : COMPLETE
ENTER NEW PASSWORD :
ESC : QUIT ENTER : COMPLETE
RETYPE NEW PASSWORD :
ESC : QUIT ENTER : COMPLETE
NEW PASSWORD COMPLETE
ESC : QUIT ENTER : COMPLETE