Filter
Top Products
8
DISCONNECTING THE POWERLINK CABLE FROM THE SCANNER
Before removing the cable from the scanner, Metrologic recomme nds that the
power on the host system is off and the power supply has been disconnected
from the PowerLink cable.
1. Locate the small ‘pin-hole’ on the back of the scanner.
2. Bend an ordinary paperclip into the shape shown a bove.
3. Insert the paperclip (or other small metallic pin) into the small ‘pin-hole’.
4. You will hear a faint ‘click’. Pull gentl y on the strain-rel ief of the PowerLink
cable and it will slide out of the scanner.
&
op
q
n