Filter
Top Products
22
APPENDIX B
Default Settings
Many functions of the scanner can be “programmed” – that is, enabled or disabled. The
scanner is shipped from the factory programmed to a set of default conditions. The default
parameter of the scanner has an asterisk (*) in the charts on the following pages. If an
asterisk is not in the default column then the default setting is OFF or DISABLED. Every
communication does not support every parameter. If the communication supports a
parameter listed in the charts on the following pages, a check mark will appear.
Parameter Default OCIA RS232
Light
Pen
IBM
46XX
KBW USB
Normal Scan Mode
(Blink)
*
9 9 9999
Continuous Scan
Mode
9 9 9999
UPC/EAN * 9 9 9999
UPC-A *
9 9 9999
EAN-8 * 9 9 9999
EAN-13 * 9 9 9999
UPC-E *
9 9 9999
Code 128 * 9 9 9999
Code 93 * 9 9 9999
Codabar *
9 9 9999
Interleaved 2 of 5
(ITF)
*
9 9 9999
MOD 10 check on ITF 9 9 9999
Code 11 9 9 9999
Code 39 *
9 9 9999
Full ASCII Code 39 9 9 9999
Telepen 99
As Code
39
999