Filter
Top Products
33
DEFAULT SETTINGS
Many functions of the scanner can be “configured” or enabled/disabled. The
scanner is shipped from the factory configured to a set of default conditions. All
default parameters of the scanner have an asterisk ( * ) marked in the default
column. If an asterisk is not in the default column then the default setting is off or
disabled. Every interface does not support every parameter. A check
mark (
9
) will appear in the interface column if it supports the parameter listed.
Parameter Default OCIA RS232
Light
Pen
IBM
46xx
KBW USB
Laser
Emulation
Normal Scan Mode
*
9 9 9 9 9 9 9
Continuous Scan Mode
9 9 9 9 9 9 9
Blinky Scan
9 9 9 9 9 9 9
Continuous Blinky Scan
9 9 9 9 9 9 9
Custom (one shot) Scan
9 9 9 9 9 9 9
Manual Activation Mode
9 9 9 9 9 9 9
Long-Range In-Stand
*
9 9 9 9 9 9 9
Short-Range In-Stand
9 9 9 9 9 9 9
Long-Range Out-of-Stand
*
9 9 9 9 9 9 9
Short-Range Out-of-Stand
9 9 9 9 9 9 9
CodeGate Active In-Stand
9 9 9 9 9 9 9
CodeGate Inactive In-Stand
*
9 9 9 9 9 9 9
CodeGate Active
Out-of Stand
*
9 9 9 9 9 9 9
CodeGate Inactive
Out-of Stand
9 9 9 9 9 9 9
UPC/EAN
*
9 9 9 9 9 9 9
Code 128
*
9 9 9 9 9 9 9
Code 93
*
9 9 9 9 9 9 9
Codabar
*
9 9 9 9 9 9 9
Interleaved 2 of 5 (ITF)
*
9 9 9 9 9 9 9
MOD 10 check on ITF
9 9 9 9 9 9 9
Code 11
9 9 9 9 9 9 9
Code 39
*
9 9 9 9 9 9 9
Full ASCII Code 39
9 9 9 9 9 9 9