MGE UPS Systems 2200C Power Supply User Manual


 
34007532EN/AA - Page 9
1.3 Control panel
Alarms
Hold down to display
percent load:
Lamp test or buzzer OFF.
Forced transfer to bypass and back
by pressing button 3 times in less
than 5 seconds.
ON / OFF.
%
battery
remaining
100%
80%
50%
20%
1. Presentation
Status of programmable outlet 1:
Operation on bypass (no backup power available).
Operation in ON-LINE mode (backup power available).
Status of programmable outlet 2:
Operation on battery power.
Supplied with power.
Status change in
progress.
16
17
18
19
20
21
22
23
25
24
Press simultaneously at
least 3 seconds to reset
the “End of battery life”
alarm.
%
load
100%
80%
50%
20%
27
26
UPS
overload
Electronics
fault
Battery
fault *
(*) : flashing LED + buzzer: battery fault (battery must be replaced).
flashing LED + long buzzer (once per hour): theoretical end of battery life (replacement recommended).
100%
80%
50%
20%
test
%
1
2
%
BYPASS
16
17 18 19 20 21 22 23 24
25 26
27