MGE UPS Systems EX7 Power Supply User Manual


 
16 Pulsar EX: E-51032233XT/AC MGE UPS SYSTEMS
operation on battery
no utility power
1a to 1d indicating the battery
recharge percentage: here,
between 12 and 25%
1e indifferent
1f on
silence
your load is supplied by the utility power
(on line)
1a to 1d indicating the load charge
percentage: here 50%
1e off
1f on
silence
At whatever point the utility power
returns, Pulsar switches to normal
operation:
return of utility power load charge percentage
Note:
The alarm silence button is to deactivate or
activate the audio warning device when
operating on battery, or when site wiring
fault occured.
If utility power is present, hold alarm
silence button in:
x +
ε
mn
x mn
5 mn
0 mn
to
if Pulsar is operating on battery
without load: UPS switches off
Pulsar switches off
automatically
warning alarm at low
battery
indicating the
remaining battery
time: here, between
75 and 87%
to
silence
1a
1c
1a
1f
1a
1f
silence
flashing
1d
1f
1a
1d
1e
1f
flashing
1e
load off
1 beep every 10 s
your load is supported
by the battery
to off
you have less than 12% battery
time remaining: power down
your load, Pulsar will soon
switch off automatically
UPS output "off"
to off off
1 beep every 3 s
break in utility power
on
flashing
on