Filter
Top Products
1.0 Scope
This section is a general description of the Topaz 100 Ultra-Isolator. Includes receiving, electrical, environmental,
mechanical specifications, and cabinet standard dimensions.
1.1 Reference Manuals
N/A
1.2 Section Descriptions
This manual is divided into four sections:
Section 1 Introduction
This section is a general description of the Topaz 100 Ultra-Isolator. Includes receiving, electrical, mechanical
specifications, and cabinet measurements.
Section 2 Installation
This section guides the User through installation requirements, wire, and circuit diagrams, hardwired connections,
and factory configuration ratings for the Topaz 100.
Section 3 Maintenance and Troubleshooting
This section contains preventive maintenance for the Topaz 100 units, and a troubleshooting guide to assist the
User with any communication and configuration connections.
A Glossary in the rear of this manual provides definitions of terms used within the text.
1.3 Receiving
Before accepting the shipment from the freight carrier, inspect the exterior surfaces of all shipping containers or
packaging used, and the equipment, for damage that may have occurred during transit. If the shipping containers
or equipment shows evidence of damage, note the damage on the receiving document (bill of lading) prior to sign-
ing for receipt of equipment.
ALL CLAIMS FOR SHIPPING DAMAGE MUST BE FILED DIRECTLY WITH THE CARRIER. Replacements for
damaged components should be ordered through MGE UPS SYSTEMS.
Check by thorough inspection if any electrical connections have become loose because of vibration during ship-
ment. Check the nameplate to be sure that the voltage and frequency match the available power supply. Under
no circumstance should the unit be connected to a power source which does not conform to the nameplate rating.
Installation and User Manual
Introduction
Introduction
page 1 — 1